2100GPH 12W Aquarium Wave Maker DC 24V Powerhead with Magnetic Mounting

Wavemaker with adjust knob Controller , Circulation Pump for 50-100 Gallon Tank;

Super Quiet aquarium wavemaker pump,SINE wave control tech,noise level less than 25db;

comes with a protect foam guard prevent things and fish sucked from the rear of the fan;

Mini size and powerful wavemaker ,12W,2100GPH max flow ,pump size 2.7**2.7*2.2inches,

suitable for freshwater and saltwater aquariums.

There are 3 buttons and 1 adjust knob on the controller, button descriptions as follow:

K1:Wi-Li/Feed:

Press the button to set master control, slave control or operate individually.when the blue light is ON,it means the pump is master control;when the blue light is flashing,it means the pump is slave control;when the blue light is OFF,it means the pump is individually control;

Press hold the button about 3 seconds to enter or exit the feed mode;

K2:SPEED/Light Sensor:

Press the button to adjust the speed of flow rate when use mode M1 .

Press hold the button about 3 seconds to enter or exit the night mode,orange light will be ON after enter night mode;

K3:MODE/LOCK:

Press the button to select different 5 modes of M1,M2,M3,M4,M5.

Press hold the button about 3 seconds to lock or unlock the controller,the round light will be ON if controller was locked;

Note:

Indoor use only ,the controller and power supply are not waterproof;

Rotate the knob to adjust the frequency to adjust the wave shape,use the knob to adjust the wave shape when enter mode M2 or M3,

Wave length reaches maximum when the wave length is the same as the tank length. Wave length is increased by rotate the knob clockwise; wave length is reduced by rotate the knob counter-clockwise;

Press hold “FEED” button about 3 seconds to enter or exit the feed mode, the pump will stop 10 minutes and back automatically after 10 minutes,and if you don’t want to wait 10minutes, just press hold the button again to exit.

Night Mode:

Pump works normally during day time and enter into night mode automatically when it’s dark,the pump will work at the lowest speed when enter night mode, press hold the SPEED/Light Sensor button about 3 seconds to exit the night mode. the orange light on the top left of controller will be ON if it enter night mode;

Comes with strong magnet mounting and a protect foam guard prevent things and fish sucked from the rear of the fan;

Unplug the pump and twist to open the pump cover and clean the impeller if pump stop;

Among two or more wave makers, press the button of Wi-li to set one as the master and the others as slave. You can achieve the same function and operation for all the pumps by adjusting the master controller.the blue light on the top left of controller will be ON if it enter master control, and blue light will be flashing when it enter slave control, and light OFF means it was at individually control mode;

There are 3 buttons and 1 adjust knob on the controller, button descriptions as follow:

K1:Wi-Li/Feed:

K2:SPEED/Light Sensor:

K3:MODE/LOCK:

Night Mode:

Product description